ICL’s cells and cuvettes meet the most exacting requirements of modern spectrophotometric procedures. All spectrophotometer cells are completely fused without the use of low melting intermediate glasses or cements. In other words, quartz is fused to quartz and glass is fused to glass. This eliminates strains due to differences in coefficients of expansion found in cells fused with intermediate low melting temperature glasses. Because of the fused construction, the window joints of ICL spectrophotometer cells are unaffected by all types of cleaning solutions.
ICL’s economical polystyrene and polymethyl methacrylate (“PMMA”) cuvettes offer superior optical performance coupled with the convenience of being disposable. Using disposable spectrophotometer cells eliminates cleaning and cross contamination.
The Adjustable Cuvette Holder accepts rectangular cuvette style cells with pathlengths ranging from 1mm to 50mm and aligns the cell in the beam of any IR or FTIR spectrophotometer.
Disposable polyethylene caps for PS and PMMA cuvettes can also be used with any standard 10mm pathlength fused silica spectrophotometer cell.
The PTFE Magnetic Cell SpinRound fits into the standard 10mm rectangular cuvette style spectrophotometer cell and provides rapid vertical and horizontal mixing with minimum vortexing.
Molded polypropylene Spectro Cell Rack holds twenty 10mm lightpath cuvette style spectrophotometer cells in two tiers with numbered square wells. The rack is meant for standard spectrophotometer cells with a 12.5mm width.
The Cylindrical Cell Holder mounts fused silica cylindrical cells in IR and FTIR spectrophotometers and properly aligns the cell in the path of the instrument’s beam. This holder can be used with 10mm, 50mm and 100mm pathlength spectrophotometer cells.
The Sampler/Syringe is made of polypropylene and can be used with hot liquids.
This vacuum operated spray device was designed for washing rinsing and drying the interior of a UV-VIS cuvette style spectrophotometer cell.