|
Opticlear™ Optical Cleaning Suspension
Opticlear™ is a suspension based cleaning system that peels contamination off the face of optics. It can be used on both coated and uncoated optics.
Availability & Estimated Shipping Date | Order NOW | more info... |
|
|
Cadmium
Manganese Telluride (CdMnTe) Magneto Optical Crystals |
|
4" Diameter Polished SS Platens
The 4" diameter polished platens are useful for making large diameter polymer films. The platens are made from 1/2" thick 316SS. Platen surfaces are polished to a mirror finish.
Availability & Estimated Shipping Date | Order NOW | more info... |
|
Polyethylene Sheets
Polyethylene is a useful transmission material for far infrared sampling. Polyethylene is non-absorbing between 16 and 2500 microns.
Availability
& Estimated Shipping Date | Order
NOW | more info... |
|
Water Jacketed Dies for Heating & Cooling Solid Samples
Water jacketed dies enable heating and cooling of samples under force. These dies are available with 5mm to 40mm diameter anvils.
Availability
& Estimated Shipping Date | Order
NOW | more info... |
|
European Pharmacopoeia 2.2.24 Reference Standard
ICL's PhEur 2.2.24 Reference Standard is a calibration standard certified to conform to the requirements of Chapter 2.2.24 of the European Pharmacopoeia.
Availability & Estimated Shipping Date | Order NOW | more info... |
|
|
PTFE
& Polyethylene IR Sample Cards
U.S.
Patent No. 5,470,757 & 5,764,355
ICL
has brought back the 3M® card under a license from 3M.
Available in PE and PTFE substrates.
Availability
& Estimated Shipping Date |
Order NOW | more info...
|
 |
Polyethylene
IR Sample Cards with Two Sample Substrates
U.S.
Patent No. 5,470,757 & 5,764,355
ICL
has brought back the 3M® card under a license from 3M.
Available in polyethylene only with 2 sample substrates
per card.
Availability
& Estimated Shipping Date |
Order NOW | more info...
|
|
|
Real
Crystal® IR Sample Cards
Real
Crystal® IR Sample Cards are disposable sample cards
like 3M® cards, but with non-absorbing
crystal sampling substrates made from NaCl, KBr and KCl
crystals instead of the PTFE and Polyethylene used in 3M®
cards. Available with cover slips for volatile samples.
Availability
& Estimated Shipping Date | Order
NOW | more info...
|
|
|
Pharmaceutical
Active Ingredients Intrinsic Dissolution Rate Kit
ICL's
new dissolution kit enables testing of the intrinsic dissolution
rate of active pharmaceutical ingredients.
Availability
& Estimated Shipping Date | Order
NOW | more info... |
|
|
Clothes
Pin™ Cover Slip Holder
The
Clothes Pin™ Cover Slip Holder will hold a cover slip
in place over a Real Crystal® IR Card and enable mounting
of the cover slip, the sandwiched volatile sample and the
sample card in the sample compartment of any spectrophotometer.
Availability
& Estimated Shipping Date
|
Order NOW | more info...
|
|
|
Transmission
Sampling Kits
ICL's
transmission sampling kits contain a comprehensive array
of sampling accessories for solid, liquid and gas sampling.
Contact ICL or consult the catalog for a comprehensive description
of the contents of each kit.
Availability
& Estimated Shipping Date |
Order NOW | more info...
|
|
|
Reflectance
Sampling Kits
ICL
offers two reflective sampling kits. Each contains a Mini
“D” Diffuse Reflection Accessory, a 30° Specular
Reflection Accessory and either a single bounce or multiple
bounce HATR. Part No. 0000-7429 contains ICL's Basics™
HATR (Part No. 0015-4713). Part No. 0000-7430 contains ICL's
High Energy Universal Sampler HATR (0015-7458). Specify
instrument and flat or trough top plate.
Availability
& Estimated Shipping Date
| Order
NOW | more info... |
|
|
High
Energy Universal Sampler HATR
This
new single reflection Horizontal ATR has the highest energy
throughput of any ATR accessory on the market today.
Availability
& Estimated Shipping Date | Order
NOW | more
info...
|
|
|
Split
Pea™ Hemi Micro HATR Sampler
The
Split Pea™ Hemi Micro ATR Sampler has the smallest
sampling area of any ATR accessory.
Availability
& Estimated Shipping Date | Order
NOW | more info...
|
|
|
E-Z
Press™ 12, 15 & 20 Ton Hydraulic Presses
ICL's
patented E-Z Press™ hydraulic lab presses feature a
unique lightweight ergonomic design. All E-Z Press™
models weigh less than 90 pounds due to ICL's patented unibody
construction.
Availability
& Estimated Shipping Date | Order
NOW | more info...
|
 |
1 & 2 Ton E-Z Presses™
ICL's 1 & 2 Ton E-Z Presses™ feature the same unibody construction and features common to our E-Z Press™ line, but we have redesigned these presses to maximize the sensitivity of the press for exact reproducibility of applied force.
Availability & Estimated Shipping Date | Order NOW | more info...
|
|
|
Polystyrene
Calibration Films on KBr Windows
In
addition to standard polystyrene calibration films, ICL
offers several other calibration options. Superior calibrations
are performed with radially symmetric films which eliminate
the orientation effects of extruded films used for NIST
Standard 1921 calibrations.
Availability
& Estimated Shipping Date | Order
NOW | more info... |
|
|
Disposal
Low E Sample Cards w/ Inverted 30° Specular Reflection
Accessory
The
30°
specular reflection accessory
takes on a new dimension when it is configured in an inverted
orientation and used with disposable glass sample cards
coated with low emissivity coating.
Availability
& Estimated Shipping Date | Order
NOW | more info...
|
|
|
Stainless
Steel & Nickel Plated Aluminum Long Path Gas Cells
ICL’s
all metal gas cells are available in stainless steel and
electroless nickel plated aluminum. The cells are designed
for mounting in a center focus FTIR. Optics are mounted
on removable sub-assemblies.
Availability
& Estimated Shipping Date | Order
NOW | more info... |
|
|
G-3PTFE
10cm Teflon PTFE Gas Cell
All
components of the G-3PTFE 10cm gas cell that contact the
sample can be made entirely of Teflon® PTFE, making
the cell useful for any gas sample that might attack, or
be contaminated by, glass or stainless steel gas cell components.
The G-3PTFE is useful for analysis of pure gases and mixtures
in which the constituent gases are present in concentrations
of 5% or more.
Availability
& Estimated Shipping Date
| Order
NOW | more info... |
|
E-Z™ Quick Table Top KBr Pellet Press
The E-Z™ Quick Table Top Press operates on the same toggle action principle as our Quick Press
Availability & Estimated Shipping Date | Order NOW | more info... |
|
2 Ton High Profile E-Z Press™
The 2 ton high profile E-Z Press™ incorporates the same wine press design as our standard 1 and 2 ton presses (0012-7417 & 0012-7760), but it also has a larger 5 ¼” daylight opening and a larger sample compartment to enable use of the press with Wood apparatus intrinsic dissolution dies and other applications requiring a larger daylight opening.
Availability & Estimated Shipping Date | Order NOW | more info... |
|
Digital Load Cell E-Z Press
The Digital Load Cell E-Z Press™ provides real time calibrated force readings displayed in a large, bright digital readout. These laboratory presses are available in 1000 and 5000 pound versions.
Availability & Estimated Shipping Date | Order NOW | more info... |
|
Wood Intrinsic Dissolution Apparatus
The Wood apparatus for intrinsic dissolution testing was originally developed by Dr. John Wood in 1963. The apparatus enables the calculation of the dissolution rate per centimeter squared of the intrinsic ingredients of pharmaceutical products. ICL has brought its extensive experience in the manufacture of dies and presses for laboratory applications to bear to produce an improved version of the Wood intrinsic dissolution apparatus.
Availability & Estimated Shipping Date | Order NOW | more info... |
