|
ICL’s
new patented E-Z Press™ hydraulic lab presses feature
a unique lightweight ergonomic design. All E-Z Press™
laboratory press models weigh less than 90 pounds due to ICL’s patented
unibody construction. The 12 ton E-Z Press™ laboratory press weighs
a mere 51 pounds! The 15 and 20 ton E-Z Press™
will handle a variety of lab applications, including pressing
KBr pellets for FTIR spectroscopy and briquetting samples
for XRF spectroscopy. Ports in the walls of the lab press frame
allow access for vacuum lines and electrical cords to the
area between the platens, which enables use of the press
with evacuable dies and heated platens. The 15 and 20 ton
E-Z Press™ can also be used for making thin films with
ICL’s Precision Thickness Film Maker and Heated Platens.
Automated versions or our laboratory presses are available (see Air-EZ™)
which are driven by pneumatic motors powered by your lab’s
compressed air supply.
The
newest additions to the E-Z Press™ laboratory press line are ICL’s
new 1 and 2 ton E-Z Presses™. The 1 and 2 ton units
offer sensitivity at low pressure levels in
applications where precise control of the load on the sample is required, such as pressing pellets of intrinsic pharmaceutical ingredients for dissolution rate analysis.
All
E-Z Presses™ lab presses feature built in polycarbonate safety
shields with solid brass hardware. There are die centering
depressions in the round bottom platens. Each press comes
with a standard stainless steel filling disc to flatten
the platen. The bottom platen of the 2 and 12 ton E-Z Press™
automatically centers ICL’s 13mm Macro-Micro die. The
bottom platen of the 15 and 20 ton E-Z Press™ has a
4" diameter depression and optional donut shaped inserts
are available to automatically center ICL’s 13mm, 20mm,
32mm, 35mm and 40mm die sets. Optional extra long handles
are also available for all presses for extra leverage.
Features:
• Built in Polycarbonate Safety Shields
• Adjustable Overhead Lead Screw
• Access Ports for Vacuum and Electrical Lines
• Lightweight
• Unibody Construction
• Ergonomic Design
• Automatic Die Centering
| Part
No. |
Description |
Price |
| 0012-5859 |
12
ton E-Z Press™ lab press, with safety shields, shipping weight
approx. 57 pounds, CE marked |
$2799.00 |
| 0012-7418 |
15
ton E-Z Press™lab press, with safety shields, shipping weight
approx. 90 pounds, CE marked |
$3159.00 |
| 0012-6306 |
20
ton E-Z Press™lab press, with safety shields, shipping weight
approx. 90 pounds, CE marked |
$3199.00 |
| 0012-6631 |
Film
Maker Kit with 20 ton E-Z Press™, Heated Platens
& Temperature Controller (0012-6664) & Precision
Thickness Film Maker (0012-4608) |
$7849.00 |
| 0012-6632 |
KBr
Pellet Kit with 13mm die set (0012-2477), 20 ton
E-Z Press (0012-6306) |
$3549.00 |
| 0012-5908 |
KBr
Pellet Kit with 13mm die set (0012-2477) & 12
ton E-Z Press (0012-5859) |
$3199.00 |
| 0012-2477 |
13mm
KBr die set |
$449.00 |
| 0012-5223 |
20mm
die set |
$1499.00 |
| 0011-184 |
KBr
SpectroGrade™ powder, 100 grams |
$63.00 |
| 0012-6636 |
Die
Centering Disc with 3.65" (92.7mm) aperture and
4" OD, centers ICL 20-40mm die sets |
$59.00 |
| 0012-6637 |
Die Centering Disc with 2.15" (54.6mm) aperture and 4" OD, centers ICL and Specac 13mm die sets and ICL and Distek intrinsic dissolution die bases. Also centers any die or device with 2” to 2.10” base diameter |
$59.00 |
| 0012-6638 |
Die
Centering Disc with 2.85" (72.3mm) aperture and
4" OD, centers Specac 20-35mm die sets |
$59.00 |
| 0012-6639 |
Extra
long handle for extra leverage makes pumping easier |
$59.00 |
|
