offers a heavy duty, corrosion resistant sealed liquid spectrophotometer
cell designed to withstand rough handling and continuous
sampling in laboratories. The large 25mm circular aperture
is suitable for use with both dispersive and FTIR instruments.
Each spectrophotometer cell is machined individually from
1/4 inch thick stainless steel. Pathlengths can be nominal
or calibrated to 4 decimal places (eg. 1.0152mm) and spectrophotometer
cell pathlengths can be matched within ±3% for interchangability.
All optical materials are available in standard nominal
pathlengths ranging from 0.015mm to 1mm. Other pathlengths
are also available. The window is a 39.5mm x 39.5mm x 6.5mm
hexagon. ICL also offers an infrared cell reconditioning
service in Section 0010 and a calibration service for all
spectrophotometer cells. Pathlengths can be nominal or calibrated to 4 decimal places (eg. 1.0152mm) and cell pathlengths can be matched within ±3% for interchangability. ICL also offers an infared cell reconditioning service and a calibration service for all spectrophotomer cells.
|A calibration charge of $16.00 is automatically added to the price of each cell, unless the customer expressly specifies that calibration is not required. Pathlengths for cells that are not calibrated are nominal and ICL assumes no responsibility for the customer's inability to calibrate the cell or for the failure of an uncalibrated cell to exhibit satisfactory fringing.
Model SL-4 cell is now available with pathlengths of 2.5
micron, 5 micron, 7.5 micron and 10 micron. Please call
or click here for pricing and
numbers which end with the letter "W" are
nominal part numbers only and are used online simply
to identify the cell type and window material. Part
numbers which end in "W" do not denote a
specific path length. We will assign the correct part
number when you place your order. If you want confirmation
of the correct part number please request it when
you call in your order or request an on-line e-mail
confirmation of the correct number.